WPF Viewer in WPF mode with Display Scale > 100%

WPF Viewer in WPF mode with Display Scale > 100%

Posted by: dlipsy on 2 June 2020, 9:06 am EST

• 

  dlipsy

  • Post Options:
  • Link
    Copy
  • Jump To Answer

  Posted 2 June 2020, 9:06 am EST

  I’m running Windows 10 Version 1909, and when I set my display settings to > 100% scale (like 125%), then the viewer has issues loading in Continuous mode (ViewType=“Continuous”). I have attached a zip file with MP4 showing the screenshot/behavior. I tried to enable (GalleyMode=“True”) as well, but it didn’t make a difference.

  I thought it was resolved in a more recent version of ActiveReports, but even after updating to AR 13.3, I still saw this behavior.scale-layout-settings.zip

• 

  mohitg

  

  • Post Options:
  • Link
    Copy

  Posted 3 June 2020, 7:46 am EST

  Hello,

  I have tested with the attached report but not the issue found at my end. Could you please check with the attached report and if the issue not reproducible, please share your own stripped report with sample db.

  Thanks,
  
  Mohit
  
  Untitled.zip

• 

  dlipsy

  • Post Options:
  • Link
    Copy

  Posted 3 June 2020, 10:48 am EST

  This was a Section report that was loaded from a DataGrid into the viewer using code. I can try to pull together a sample…it’s in a more complicated project/solution, so it’s going to take a little time.

• 

  mohitg

  

  • Post Options:
  • Link
    Copy

  Posted 5 June 2020, 3:45 pm EST

  Hello,

  Are you abe to reproduce the issue with the section report I gave you in my previous reply. If not, I am waiting for your sample for further progression.

  Thanks,
  
  Mohit

• 

  dlipsy

  • Post Options:
  • Link
    Copy

  Posted 5 June 2020, 3:51 pm EST

  That is not the issue - can you load the section report inside a WPF viewer and place it in a WPF StackPanel inside a window and change the % scale to > 100% - I will have to do a bit of work early next week to break out this logic into a small sample I can send it over.

• 

  mohitg

  

  • Post Options:
  • Link
    Copy

  Posted 8 June 2020, 4:06 am EST

  Hello,

  I have tried at my end and still not able to reproduce the issue. Please refer to the attached application. I checked with 125% and 150% DPI. Could you please check with the attached sample.

  Thanks,
  
  Mohit
  
  Test_ARScallin g.zip